Schließen

• Hersteller:
  Vermeer
• Modell:
  D24x40a
• Rig Größe:
  20,001 - 30,000 lbs pullback

-*2015*-

DIMENSIONS AND WEIGHTS
Weight: 17200 lbs (7801.8 kg)

ENGINE
Make and Model: Cummins 4BTA3.9
Fuel Type: Diesel
Maximum Engine RPM: 2200 rpm
Rated RPM: 2200 rpm
Gross Horsepower: 125 hp (93.2 kw)
Net Horsepower: 112.5 hp (83.9 kw)

OPERATIONAL
Thrust: 17900 lbs (8119.3 kg)
Pullback: 23800 lbs (10795.5 kg)
Maximum Carriage Speed at Maximum Engine RPM: 60 ft/min (18.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 4000 ft-lb (5423.3 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 3000 ft-lb (4067.5 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 1300 ft-lb (1762.6 Nm)
Maximum Spindle Speed at Max Engine RPM: 262 rpm
Minimum Bore Diameter: 3.5 " (8.9 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1 mph (1.6 km/h)
Automated Rod Loader: Yes
Drill Rack Angle: 18 deg

FLUID CAPACITIES
Fuel Tank: 35 gal (132.5 L)
Engine Crankcase with Filter: 11.5 qt (10.9 L)
Hydraulic Tank: 40 gal (151 .4 L)

DRILLING FLUID SYSTEM
Maximum Flow: 38 gpm (143.9 L/min)
Maximum Pressure: 2500 psi (172.4 bar)

FEATURES
Breakout System: Yes- side load vise
Stakedown System: Yes- stationary

-*2001*-

DIMENSIONS
Length: 203" (516 cm)
Width: 79" (201 cm)
Height: 85" (216 cm)
Weight: 16,600 lbs. (7530 kg)
Hydraulic pipe vise: Yes - Power Vise
Transport speed: .75 mph (.56 km/h)
Rod loader: Yes
Stationary Stakedown system: Yes
Drilling lights: Yes
Integrated drill pipes: Yes
Automatic Linkage change-over switch: Yes

OPERATIONAL
Maximum spindle torque:
4000 ft-lb (5415 Nm) @ 131 RPM
3000 ft-lb (4061 Nm) @ 174 RPM
1300 ft-lb (1760 Nm) @ 262 RPM
Actual pullback: 23,800 lbs. (10, 796 kg)
Actual thrust: 17,900 lbs. (8119 kg)
Maximum spindle speed: 260 RPM
Electrical system: 12-volt DC

WATER SYSTEM
Maximum flow: 19/38 gpm (72/144 Lpm)
Maximum pressure: 1600/800 psi (110.3/55.2 bar)

POWER SOURCE
Engine: Cummins 4BTA3.9
Gross HP: 125 HP (93 kw)
Maximum governed speed: 2200 RPM

DRILL STEM
Type: Firestick I
One-piece forged design: Yes
Length: 10' (3.0 m)
Pipe diameter: 2.375" (6.0 m)
Minimum bend radius: 108.2' (33.0 m)
Weight: 75 lbs. (34 kg)
Firestick rod capacity: 500’ (152.4 m) [300’ (91.4 m) rod box with 200' (61.0 m) clip]

BORE
Minimum bore diameter: 3.5" (8.9 cm)
Drill head will accept most locator systems.

FLUID CAPACITIES
Hydraulic reservoir: 40 gal. (151 L)
Engine oil (including filter): 11.5 qt. (10.9 L)
Fuel tank: 35 gal. (132 L)