Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:Astec Underground
-
Modell:RT960
Hersteller anzeigen Modelle anzeigen
Spezifikationen
Zusätzliche Information
Overall height – prime mover (to top of muffler): 115.7" (2.93 m)
Overall length – prime mover: 128.3" (3.28 m)
Overall transport length with backhoe and trencher with 4 (1.22 m) boom: 275.0" (6.98 m)
Angle of approach – prime mover: 58°
Angle of departure – prime mover: 60°
Minimum ground clearance – (axle to ground): 12.4" (315 mm)
Minimum ground clearance with backfill blade: 11.2" (284 mm)
Wheelbase: 76.8" (1.95 m)
Height to centerline of trencher headshaft: 29.8" (756 mm)
Angle of departure with trencher attachment: 34°
Trencher boom angle down from horizontal: 65°
Trencher boom angle up from horizontal: 50°
Backhoe transport height: 117.2" (2.97 m)
Backfill blade height: 16.1" (410 mm)
Backfill blade lift height: 19.1" (484 mm)
Backfill blade depth of cut below grade: 3.1" (78 mm)
Transport height, plow frame base tractor: 91.5" (2.32 m)
Center of rear wheel to rear of plow with chute in ground: 114.1" (2.90 m)
Plow swing angle: 25°
Plow offset from centerline: 32" (813 mm)
Angle of departure base tractor/plow attachment raised:
-with 30" (762 mm) mounted blade: 26°
-without mounted blade: 30°
Plow blade tip ground clearance base tractor with 30" (762 mm) mounted blade: 28.4" (721 mm)
Overall width base tractor: 85.8" (2.18 m)
Overall width with optional tires: 85.8" (2.18 m)
Tread width (centerlines) base tractor: 68.1" (1.73 m)
Turning radius (outside) base tractor 4-wheel steer:
-Left: 129" (3.27 m)
-Right: 129" (3.27 m)
Operating weight: 12,700 lbs (5,760 kg)*
*Operating weight of RT960 — Equipped with rear trencher, 4' (1.22 m) 110K rock boom, 110K chain and standard teeth, backfill
ENGINE
Model: 4T390 Cummins
Type: 4-stroke, turbocharged
Cylinders: 4
Bore/Stroke: 4.02" x 4.72" (102 x 120 mm)
Displacement: 239 in3 (3.9 L)
Fuel injection: Direct
Fuel: Diesel
Fuel filter: In-line strainer and spin-on cartridge
Air intake: Cross-flow
Cooling: Liquid
Horsepower:
-Gross: 99 (74 kW) @ 2200 rpm
-Net: 91 (68 kW) @ 2200 rpm
Maximum torque:
-Gross: 298 lb·ft (404 N·m) @ 1500 rpm
ENGINE COOLING
Radiator
Core size area: 415 in2 (.268 m2)
Rows of tubes: 5
Fan with standard transmission
Style: 7 blade suction
Diameter: 20.4" (518 mm)
Ratio: 1.1:1
Water pump Style: Integral
Engine oil
Pump: Deep sump plate cooler with pressurized nozzles under-piston
Pump operating angle ratings
Side-to-side: Rated 45°
Fore and aft: Rated 45°
Oil filtration: Replaceable, full-flow cartridge
POWERTRAIN
Transmission: 4-speed Hydra-shift with constant gear mesh
Drive: Hydrostatic 4WD variable displacement axial-piston pump 0 – 46.5 gpm (0-176 L/min)
U-joints: Constant velocity
Axle ratio: 19.2:1
Planetaries: 6:1 – Outboard
Differentials: Electrically actuated
Steering: 2W, 4W and crab
Axle oscillation: 20°
Service brakes: Hydrostatic
Parking brake: Internal, SAHR multi-disc
Travel speeds -
-1st: 1.4 mph (2.2 km/h)
-2nd: 2.9 mph (4.7 km/h)
-3rd: 5.0 mph (8.1 km/h)
-4th: 10.5 mph (16.8 km/h)
(Rated speeds are in forward and reverse)
TIRES
38 x 18.00-20, 10 PR
38 x 18.00-20, 12 PR (heavy-duty)
SERVICE CAPACITIES
Fuel tank: 25 gal (95 L)
Cooling system: 18.2 qt (17.2 L)
Engine with oil filter: 11.6 qt (11 L)
Hydraulic reservoir: 20 gal (75.7 L)
Total hydraulic: 22 gal (83.3 L)
Transmission: 9 qt (8.5 L)
Axle center (each): 9.5 qt (9 L)
Planetaries (each): 1.1 qt (1 L)
Trencher planetary drive: 1.5 qt (1.4 L)
Hydra-Borer System: 1.0 qt (0.9 L)
HYDRAULICS
Ground drive pump: 46.5 gpm (176 L/min)
Attachment drive pump: 46.5 gpm (176 L/min)
Steering pump: 7.1 gpm (27 L/min)
Accessory pump: 11.4 gpm (43.3 L/min)
Filtration: Full-flow spin-on cartridges
Accessory return: 2 micron
Charge pump flow (2): 2 micron
NOTE: Pump capacity rated @ 2385 engine rpm.
ELECTRICAL SYSTEM
Voltage: 12 volts, negative ground
Alternator: 65 amp
Starter: 3.35 hp (2.5 kW)
Battery: 685 CCA@ 0°F (-17.7° C)
OPERATOR / ENVIRONMENT
ROPS
Left and right entry/exit
Unobstructed operator platform
Swivel seat w/seat belt
Key start
Hand and foot controls
Iso-mounted platform
INSTRUMENTATION
Engine coolant temperature gauge
Hydraulic oil temperature gauge
Fuel level indicator
Voltage meter
Engine oil pressure indicator
Tachometer/hourmeter
Hydraulic charge filter indicator
Hydraulic filter indicator
Air filter restriction indicator
Neutral indicator
Alternator light
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.